Teac UD-701N USB DAC, Network Audio Player & Stereo Preamplifier (Black) - Manual (Page 24)

24
Display brightness
MENU
DIMMER
BRIGHT
BRIGHT
Bright
SLIGHTLY BRIGHT
Lit dimly
DARK
Dark
AUTO OFF
Turns off automatically
o The display turns off when not being operated.
NOTE
This can be set directly with the remote control DIMMER button.
Volume display
MENU
VOLUME TYPE
STEP (0-100)
This sets how the volume is shown.
STEP (0-100)
This shows the volume in steps from 0 (minimum) to 100 (maximum).
dB
This shows the volume in decibels (dB).
Screen indication
Select the information shown to the right of the playback source.
MENU
DISPLAY TYPE
VOLUME
VOLUME
The volume is shown.
SAMPLING FREQ.
Information about the playback source is shown.
NOTE
This can be sent directly with the remote control DISPLAY button.
Automatic power saving function
This unit has an automatic power saving function.
o The automatic power saving function is ON when the unit is
shipped new from the factory.
MENU
AUTO POWER SAVING
ON
OFF
The automatic power saving function is disabled.
ON
The unit will automatically enter standby mode if no audio is output
and no operation is conducted for about 30 minutes.
PCM signal D/A conversion
DELTA SIGMA Fs
MENU
DELTA SIGMA Fs
512x Fs
This sets the ΔΣ modulator sampling frequency.
Select the sound setting you prefer.
128× Fs
256× Fs
512× Fs
PCM DELTA SIGMA
MENU
PCM DELTA SIGMA
MULTI BIT
This sets the ΔΣ modulator output format.
MULTI BIT
This outputs using multi level.
DSD (1 BIT)
This outputs using DSD format.
DSD low-pass filter
MENU
DSD LOW PASS FILTER
OFF
OFF
The low pass filter is disabled.
FIR 1
FIR low pass filter type 1
FIR 2
FIR low pass filter type 2
o FIR 1 and FIR 2 settings are only effective during DSD input and/
or when PCM DELTA SIGMA is set to DSD (1 BIT).
Settings (continued)