Peavey VSX 48e Programmable Loudspeaker Management System (1 RU, 4 Inputs, 8 Outputs) User Manual
Page 10
10
Link
Delay
Crossover (X-Over)
Many times, in particular for stereo signals, you may want to make the same adjust to two or more channels at
the same time. Using the link function, inputs can be linked to other inputs and outputs can be linked to other
outputs. The check marks on the above screen indicate linkage. When channels are linked, the edit buttons for
those channels will blink simultaneously when editing.
Up to 680 milli-Seconds of delay can be added to any input or output. The delay resolution is 1 sample or 10.4
micro-Seconds.
Although the button is labeled X-OVER and that is how these functions are often used, each input and output
have very flexible high-pass and low-pass filters that can be configured for many applications.
To activate the filter use the parameter control to select bypass on the screen and change it to the desired filter
type. There are 3 different filter alignments available, Butterworth, Bessel and Linkwitz-Riley. The filter slopes of
6 dB/Octave to 48 dB/Octave can be selected.