26e and vsx, English features, Digital loudspeaker processors – Peavey VSX 48e Programmable Loudspeaker Management System (1 RU, 4 Inputs, 8 Outputs) User Manual

Page 3

Advertising
background image

3

VSX

26e and VSX

48e

Digital Loudspeaker Processors

The VSXe processors are DSP-based, loudspeaker management systems that boast a 96kHz sample rate and a floating point DSP processor for
quiet accurate filter response. The crossover filters are fully adjustable and any input can be routed to any output. The VSX® Editor Program for PC
allows complete remote setup and operation via the front panel USB port or by the rear panel Ethernet network connection. Files can also be saved
and loaded using this interface software.

This manual covers both the VSX 26e and VSX 48e DSP processors. The units are essentially identical except for the number of inputs and outputs.

Please read this guide carefully to ensure your personal safety as well as the safety of your equipment.

ENGLISH

Features

Balanced Inputs: VSX 26e 2, VSX 48e 4

Balanced Outputs: VSX 26e 6, VSX 48e 8

96 kHz Sample rate

24 bit Delta-Sigma A/D and D/A converters

Dynamic range input to output greater than 109 dB (A-weighted) or 107 dB (unweighted)

Every input features Gain, Mute, HP and LP filters, 8 bands of PEQ, polarity and Delay (680 mS),

Every output features: 9 bands of PEQ, gain, compressor/limiter, polarity, Delay (680 mS), mute, and crossover/band-pass filters

EQ filter types include: PEQ, Low-Shelf, Hi-Shelf, Low-Pass, High-Pass, All-Pass1 and All-Pass2.

Crossover/Band-pass filters feature Butterworth, Bessel or Linkwitz-Riley alignments from 1st order (6 dB/Oct) to 8th order (48 dB/Oct).

Signal generator (sine, white noise, pink noise).

Channels can be linked for simplified stereo operation.

5 segment LED meters on each input

5 segment LED meters with limit indication on each output

2 XLR balanced inputs and 6 XLR balanced outputs VSXe 26

4 XLR balanced inputs and 8 XLR balanced outputs VSXe 48

Maximum input and output level +20 dBu, XLR balanced inputs and outputs.

Frequency response 20 Hz to 20 kHz +0, -1 dB

THD+N < 0.01% at 1 kHz.

Security lock

USB B port for setup and control

Ethernet port for setup and control.

Dimensions (HxWxD) 1.75" x 19" x 8" / 45mm x 480mm x 20.5mm

Weight 5.2 lbs /2.88 kg

PC Editor Programs allow complete remote setup and operation via USB or Ethernet.

NOTE:

The VSX processors can be setup and operated both from the front panel and from the VSX Editor running on a PC. The

PC can be connected to the VSX via USB or Ethernet.

Advertising