Epson 61p - Manual (Page 74)

74 Maintaining and Transporting the Projector
5. Use the screwdriver to loosen the two screws holding the lamp in
place. (You can’t remove the screws.)
6. Hold the lamp as shown and pull it straight out.
7. Gently insert the new lamp. If it doesn’t fit easily, make sure it’s
facing the correct way.
Don’t remove
these screws
warning
This product includes a lamp
component that contains
mercury (Hg). Please consult
your state and local
regulations regarding disposal
or recycling. Do not put it
in the trash.
caution
Do not touch the glass
portion of the lamp assembly.
Touching the glass could
result in premature lamp
failure.