Canon PIXMA PRO-200 Wireless Inkjet Photo Printer User Manual
Page 347
Click
OK
when the confirmation message appears.
When a message prompting you to change the media type appears, select a media type from the list
and click
OK
.
3.
Check the paper size
Check the
Page Size
list. When you want to change it, select another page size from the list. The list
displays only sizes that can be used for borderless printing.
4.
Adjust the amount of extension from the paper
If necessary, adjust the amount of extension using the
Amount of Extension
slider.
Moving the slider to the right increases the amount extending off the paper, and moving the slider to
the left decreases the amount.
It is recommended to set the slider at the second position from the right for most cases.
Important
• When the
Amount of Extension
slider is set to the rightmost position, the back side of the
paper may become smudged.
5.
Click
OK
When you perform print, the data is printed without any margins on the paper.
Important
• When a page size that cannot be used for borderless printing is selected, the size is automatically
changed to the valid page sizes for borderless printing.
• When
Borderless
is selected, the
Printer Paper Size
,
Duplex Printing (Manual)
,
Stapling Side
settings, and the
Stamp/Background...
button on the
Page Setup
tab appear grayed out and are
unavailable.
• When
Envelope
,
Hagaki A
,
Light Fabric Iron-on Transfers
,
Dark Fabric Iron-on Transfers
,
High
Resolution Paper
, or
T-Shirt Transfers
is selected from the
Media Type
list on the
Main
tab, you
cannot perform borderless printing.
• Depending on the type of paper, Borderless Printing may reduce the print quality at the top and
bottom edges of the paper.
Borderless Printing on thick paper may also smudge the front or back surface of the paper.
• When the ratio of the height to the width differs from the image data, a portion of the image may not
be printed depending on the size of the media used.
In this case, crop the image data with an application software according to the paper size.
Note
• When
Plain Paper
is selected for
Media Type
on the
Main
tab, borderless printing is not
recommended. Therefore, the message for media selection appears.
When you are using plain paper for test printing, select
Plain Paper
, and click
OK
.
347