Canon PIXMA PRO-200 Wireless Inkjet Photo Printer - Manual (Page 564)

• For macOS:
Printing a Nozzle Check Pattern
If the pattern is not printed correctly, go to the next step.
Step2 Clean the print head.
After cleaning the print head, print the nozzle check pattern and check the result.
• For Windows:
Clean the print head
• For macOS:
Clean the print head
If it does not improve, clean the print head again.
If it still does not improve, go to the next step.
Step3 Clean the print head deeply.
After cleaning the print head deeply, print the nozzle check pattern and check the result.
• For Windows:
Clean the print head deeply
• For macOS:
Clean the print head deeply
If it does not improve, turn off the printer, wait for more than 24 hours, and go to the next step. When you turn the printer off, do not unplug it
from the power supply.
Step4 Clean the print head deeply again.
After cleaning the print head deeply again, print the nozzle check pattern and check the result.
If it still does not improve, go to the next step.
Step5 Request a repair.
The print head may be damaged. Contact your nearest Canon service center to request a repair.
For details on printing the nozzle check pattern, print head cleaning, and print head deep cleaning, see Print
Head .
Check5 When using paper with one printable surface, make sure paper is loaded with
printable side facing up.
Printing on the wrong side of such paper may cause unclear prints or prints with reduced quality.
Refer to the instruction manual supplied with the paper for detailed information on the printable side.
564