Auto maintenance settings – Canon imagePROGRAF TM-300 36" Large-Format Inkjet Printer with L36ei Scanner Kit User Manual
Page 170
Auto maintenance settings
This setting item is displayed by tapping
Device settings
after tapping
(
Setup
) on the HOME
screen.
Important
• The administrator password is required to change settings if it is enabled for changing settings using
the operation panel.
•
Auto nozzle check
Enables/Disables automatic nozzle checking. You can also select the page interval to perform automatic
nozzle checking.
•
Nozzle check error display
Enables/Disables displaying the nozzle check error.
•
System cleaning frequency
Specifies the frequency of automatic system cleaning.
Note
• To maintain print quality, we recommend you select
Short
if you use the printer at a higher place.
•
Print pattern after new head
Selects whether you print an adjustment pattern after replacing the print head.
170