Epson 1200 series - Manual (Page 25)

2
Setting Up the Scanner 2-5
R4C448
Rev. C
A5 size CHAP2.FM
2/11/00 Pass 3
R Proof Sign-off:
tanto name
SEI Y.Takasaki M.Fujimori
leader name M.Fujimori
editor name
SEI M.Kauppi
Releasing the Transportation Lock
Before connecting the scanner to a power source, you must release
the transportation lock.
1. Place the scanner on a flat, stable surface with the back facing
you.
2. Turn the transportation lock on the right side to the unlocked
position using a coin or similar object, as shown below.
Note:
❏ When you cannot turn the transportation lock because of excessive
resistance, turn the scanner on, then, after the operate light starts
flashing red, turn the scanner off, and try again. See the next section
to turn on the scanner.
❏ Return the transportation lock to the locked position when
transporting the scanner.