Epson 1200 series - Manual (Page 33)

2
Setting Up the Scanner 2-13
R4C448
Rev. C
A5 size CHAP2.FM
2/11/00 Pass 3
R Proof Sign-off:
tanto name
SEI Y.Takasaki M.Fujimori
leader name M.Fujimori
editor name
SEI M.Kauppi
Connecting the scanner
Connect the scanner to your computer or to another SCSI device
as follows:
Note:
The combination of 50-pin and 25-pin connectors you need varies
depending on the maker of your SCSI device and SCSI interface board.
1. Make sure the scanner, computer, and all other SCSI devices
are turned off and unplugged from the power source.
The scanner is the last device in the daisy chain
(other SCSI device)
terminator on
The scanner is in the middle of the daisy chain
terminator off
(other SCSI device)