Epson 1200 series - Manual (Page 66)

3-26 Installing the Software
R4C448
Rev. C
A5 size CHAP3.FM
2/11/00 Pass 3
L Proof Sign-off:
tanto name
SEI Y.Takasaki M.Fujimori
leader name M.Fujimori
editor name
SEI M.Kauppi
2. In the following or similar dialog box, move the slider to the
right or left until the two shades of the gray horizontal stripes
match.
Note:
View the screen from a distance. The gray stripes will not perfectly
blend together; however, try to make the two tones match as closely
as possible.
3. Click OK to register the calibration setting.
4. The message Setup is complete appears. Click OK .
You will not need to change the screen calibration again so long
as you continue to use the same display.
r