Kodak PIXPRO AZ528 Digital Camera (Black) - Manual (Page 43)

42
Display of Wi-Fi Connection Status
The Wi-Fi has successfully connected but
App is not enabled:
Wi-Fi Mode
Connected with device
3')'JJXKYY ^^ ^^ ^^
AP mode
Disconnect
The Wi-Fi has successfully connected and
App is enabled:
Wi-Fi Mode
Connected with APP
XXXXX
Disconnect
4. Press the A C / C A / A C /
C A buttons to select and then
press the button to confirm your
selection. Enter the completion of
WPA2 PSK after password storage.
5. Connect immediately after saving.
• If connected, the LCD will display as
shown below:
Station
Wi-Fi Mode
Connected with device
SSID: XXXXXXXX
Disconnect
• If connect failed, please check Wi-Fi
device and try again.
6. After connection, click the icon of the
App on the smart device, you may
use it to carry out relative operation.