LEICA V-Lux 5 Digital Camera - Manual (Page 69)

69
Preparation/Basics
Opening out the monitor
1 2 3
1 Place your finger in the cleft on the right side of the monitor and open the
monitor toward the left side (maximum 180°)
2 The monitor can be rotated 180° upward to a horizontal position
3 Return the monitor to its original position
●
Only rotate the monitor after opening it wide enough, and be careful not to use excessive
force. Doing so may cause damage to this unit.
●
When not using the monitor it is recommended that you close it with the screen facing inward to
prevent dirt and scratches.
Setting the Language, Time and Date
The clock is not set when the camera leaves the factory.
1 Set the main [ON/OFF] switch of the camera to [ON]
2 Press [MENU/SET]
3 Press to select your language, and press
[MENU/SET] to confirm your selection
•The message [Please set the clock] appears.
4 Press [MENU/SET]
5 Press to select the relevant menu item (year,
month, day, hour, minute), and press to confirm
the setting
6 Press [MENU/SET]
7 Press [MENU/SET] when the message [The clock
setting has been completed.] appears on screen
8 Press [MENU/SET] when the message [Please set the home area] appears
9 Press to select your time zone and press
[MENU/SET]