LEICA V-Lux 5 Digital Camera - Manual (Page 82)

Recording
82
2 Touch the focal point
•If there are no pictures with the focus on the selected point, a
red frame will be displayed, and pictures cannot be saved.
•The edge of the screen cannot be selected.
•To switch to the [Focus Stacking] operations screen, touch
[ ].
•To highlight in-focus portion with color, touch [ ].
•To enlarge the display, touch [ ].
•You can make fine adjustments to the focus by dragging the
slide bar during enlarged display. (The same operation can be
performed using .)
3 Touch [ ] to save the picture
•The selected picture will be saved as a new separate file in the
JPEG format.
Select the focus range to combine and create a single picture
([Focus Stacking])
1
Touch [ ] on the screen in step 2 of “Select the focus point and save the
picture ([Post Focus])”
2 Choose a stacking method and touch to select it
[Auto Merging]
Automatically select photos suitable for stacking and combine them into
one picture.
•Choose by giving preference to near-focus pictures.
•Perform the focus stacking and save the picture.
[Range Merging] Combine the pictures with the selected focus position into one picture.
(When selecting [Range Merging])
Set/Cancel Set/Cancel
Reset Reset
Set/Cancel Set/Cancel
Reset Reset
3 Touch the focal point
•Select positions at two or more points.
•Focus points between the selected two positions will be
selected.
•Positions that cannot be selected, or that would produce an
unnatural result will be grayed out.
•Touch a position again to deselect it.
4 Touch [ ] to combine and save the picture
•The picture will be saved in JPEG format.
●
Only pictures taken using [Post Focus] on this camera are eligible for [Focus Stacking].