Denon AVR-S570BT 5.2-Channel A/V Receiver - Manual (Page 107)

Tips
I want the volume not to become too loud by mistake
0
Set the volume upper limit for “Limit” in the menu beforehand. This prevents children or others from increasing the volume too much by mistake.
( v p. 78)
I want to keep the volume at the same level when I turn the power on
0
By default, the volume setting when power was previously set to standby on this unit is applied at next power on with no change. To use a fixed volume
level, set the volume level at power on for “Power On Level” in the menu. ( v p. 78)
I want to have the subwoofer always output audio
0
Depending on the input signals and sound mode, the subwoofer may not output audio. When “Subwoofer Output” in the menu is set to “LFE+Main”, you
can have the subwoofer always output audio. ( v p. 97)
I want to set the optimized listening environment after changing the configuration/position of the speakers or changing a speaker to a new
one
0
Perform “Auto Setup”. This automatically makes the optimized speaker settings for the new listening environment. ( v p. 89)
I want to combine a desired video with the current music
0
Set “Video Select” in the option menu to “On”. You can combine the current music with your desired video source from a Set-top Box or Blu-ray, etc.
while listening to music from Tuner. ( v p. 59)
Contents Connections Playback Settings Tips Appendix
107
Front panel Display Rear panel Remote Index