Denon AVR-S570BT 5.2-Channel A/V Receiver - Manual (Page 95)

Distances
Set distance from listening position to speakers.
Measure beforehand the distance from the listening position to each
speaker.
o Step
Set the unit of distance.
1 ft / 0.1 ft (Default : 1 ft)
o Set Defaults
The “Distances” settings are returned to the default settings.
o Set the distance
0.0 ft – 60.0 ft
0
The speakers that can be selected differ depending on the “Speaker Layout”
settings. ( v p. 94)
0
Default settings :
Front L / Front R / Center / Subwoofer:12.0 ft
Surround L / Surround R:10.0 ft
0 Set the difference in the distance between the speakers to less than 20.0 ft.
Levels
Set the volume of the test tone to be the same at the listening position
when it is output from each speaker.
o Test Tone Start
A test tone is output from the selected speaker.
While listening to the test tone, adjust the volume output from the
selected speaker.
–12.0 dB – +12.0 dB (Default : 0.0 dB)
0
The set “Levels” are reflected in all sound modes.
0
When headphones are connected to the PHONES connector on this unit, you
cannot set “Levels”.
o Set Defaults
The “Levels” settings are returned to the default settings.
Contents Connections Playback Settings Tips Appendix
95
Front panel Display Rear panel Remote Index