Denon AVR-S570BT 5.2-Channel A/V Receiver - Manual (Page 96)

Crossovers
Set in accordance with the lower limit frequency of the base frequencies
that can be played back through each speaker.
o Set the crossover frequency
Full Band / 40 Hz / 60 Hz / 80 Hz / 90 Hz / 100 Hz / 110 Hz /
120 Hz / 150 Hz / 200 Hz / 250 Hz (Default : 80 Hz)
0
The default crossover frequency is “80 Hz”, which will work best with the
widest variety of speakers. We recommend setting to a higher frequency that
the crossover frequency when small speakers are used. For example, set to
“250 Hz” when the frequency range of the speakers is 250 Hz – 20 kHz.
0
Sounds below crossover frequency is cut off in the output from the speaker.
The cut off bass frequencies is output from the sub-woofer or front speaker.
0 When no subwoofer is used, “Front” is fixed to “Full Band”.
Contents Connections Playback Settings Tips Appendix
96
Front panel Display Rear panel Remote Index