Denon AVR-S570BT 5.2-Channel A/V Receiver - Manual (Page 117)

The menu screen is not displayed on the TV
The menu screen or status information screen is not displayed on the TV.
0
The menu screen is only displayed on this unit and a TV connected with an HDMI cable.
0
The status information will not appear on the TV when the following video signals are being played. ( v p. 104)
- Some images of 3D video content
- Computer resolution images (example: VGA)
- Video with an aspect ratio other than 16:9 or 4:3
- Some kind of HDR signals
- Some kind of game contents
- Compressed video
0
When a 2D video is converted to a 3D video on the TV, the menu screen or status information screen is not properly displayed.
0
Set the TV Format in accordance with the TV you are using.
1. Press and hold the main unit’s TUNER PRESET CH +, TUNER PRESET CH - and TUNE - for at least 3 seconds.
“V.Format:< NTSC>” appears on the display.
2. Use the main unit’s TUNER PRESET CH + or TUNE - and set the TV Format.
3. Press TUNER PRESET CH - to enter the setting.
The color of the menu screen and operations content displayed on the television is
different from normal
The color of the menu screen and operations content displayed on the television is different.
0
Performing operations on this unit during playback of a Dolby Vision signal may cause variance in the color display of the menu screen and operations
content. This is a characteristic of the Dolby Vision signal and is not a malfunction.
Contents Connections Playback Settings Tips Appendix
117
Front panel Display Rear panel Remote Index