Denon AVR-S570BT 5.2-Channel A/V Receiver - Manual (Page 62)

Original sound mode
Sound mode type Description
Multi Ch Stereo This mode is for enjoying stereo sound from all speakers.
Virtual This mode lets you experience an expansive surround sound effect when playing back through just the front (L/R)
speakers only, and when listening with stereo headphones.
Stereo sound mode
Sound mode type Description
Stereo This mode plays 2-channel stereo audio with no additional surround sound processing.
0
Sound is output from the front left and right speakers, and subwoofer if connected.
0
When multi-channel signals are inputted, they are mixed down to 2-channel audio and are played back with no
additional surround sound processing.
Direct sound mode
Sound mode type Description
Direct This mode plays back audio as recorded in the source.
Pure Direct This mode plays back an even higher quality sound than the “Direct” mode.
The following circuits are stopped in order to further improve sound quality.
0
Display indicator circuit of the main body (display will go off.)
0
In Direct and Pure Direct sound modes, the following items cannot be adjusted.
0
Tone ( v p. 57)
0
Restorer ( v p. 77)
0
Room EQ ( v p. 79)
NOTE
0
When the Pure Direct mode has been selected, the display turns off after about 5 seconds.
Contents Connections Playback Settings Tips Appendix
62
Front panel Display Rear panel Remote Index