Vivotek SD9161-H-v2 2MP PTZ Network Dome Camera - Manual (Page 251)

VIVOTEK
User's Manual - 251
© 2022 VIVOTEK INC. All Right Reserved
100
tin_support > 0" and "irled" is listed in
"capability_daynight_ illuminators
_builtin_type"
* We support this parameter when
the version number (httpversion) is
equal or greater than 0312a.
builtin_whiteled_enable
d <boolean> 6/6 Enable/disable built-in white led
* Only available when
"capability_daynight_illuminators_buil
tin_support > 0" and "whiteled" is
listed in "capability_daynight_
illuminators _builtin_type"
* We support this parameter when
the version number (httpversion) is
equal or greater than 0312a.
external_do_enabled <boolean> 1/6 Enable/disable external led mounted
on do1
* Only available when
"capability_daynight_illuminators_ext
ernal_support > 0" and "do" is listed
in
"capability_daynight_illuminators_ext
ernal_interface".
* We support this parameter when
the version number (httpversion) is
equal or greater than 0312a.
external_do<2~(k)>_ena
bled
<boolean> 1/6 Enable/disable external led mounted
on do<2~(k)>.
* Only available when "capability_ndo
> 1"
* Only available when
"capability_daynight_illuminators_ext
ernal_support > 0" and "do<2~(k)>"
are listed in
"capability_daynight_illuminators_ext
ernal_interface".
* We support this parameter when
the version number (httpversion) is
© 2022 VIVOTEK INC. All Right Reserved
101
equal or greater than 0312a.
spectrum_mode visible,
ir,
irenhanced,
blueenhanced
<product
dependent>
* Available values
are listed in
"capability_daynig
ht_illuminators
_spectrum_mode"
.
6/6 Set spectrum method .
* We support this parameter when
the version number (httpversion) is
equal or greater than 0312a.
* Only available when
"capability_daynight_illuminators_
spectrum _support > 0".
7.11 Image Setting per Channel
Group: image_c<0~(n-1)> for n channel products and m profile
n denotes the value of "capability_nvideoin" and m denotes the value of
"capability_nvideoinprofile"
NAME VALUE SECURITY
(get/set) DESCRIPTION
brightness
<Not
recommended to
use this>
-5~5,100 4/4 -5: Darker <-> 5: Bright
100: Use "
image_c<n>_brightnesspercent"
* Only available when bit 0 of
"capability_image_c<0~(n-1)>_basicse
tting" is 1
* We replace "brightness" with
"brightnesspercent".
* This parameter will not be used
after the version number (httpversion)
is equal or greater than 0400a.
contrast
<Not
recommended to
use this>
-5~5,100 4/4 -5: Less contrast <-> 5: More contrast
100: Use "
image_c<0~(n-1)>_contrastpercent"
* Only available when bit 1 of
"capability_image_c<0~(n-1)>_basicse
tting" is 1.