Vadp settings for each hyperlink – Vivotek SD9161-H-v2 2MP PTZ Network Dome Camera User Manual
Page 389
VIVOTEK
User's Manual - 389
©
2022 VIVOTEK INC. All Right Reserved
238
triggerrecord
<boolean>
1/7
Indicate whether seamless recording is
recording to local storage or not at
present.
(Read only)
* We support this parameter when the
version number (httpversion) is equal or
greater than 0312a.
guid<0~(k-1)>_id
string[127]
1/7
The connected seamless streaming ID.
(Read only)
* k denotes the value of
"seamlessrecording_c<0~(n-1)>_maxco
nnection"
* We support this parameter when the
version number (httpversion) is equal or
greater than 0312a.
guid<0~(k-1)>_number 0~3
1/7
Number of connected seamless
streaming with guid<0~(k-1)>_id.
(Read only)
* k denotes the value of
"seamlessrecording_c<0~(n-1)>_maxco
nnection"
* We support this parameter when the
version number (httpversion) is equal or
greater than 0312a.
7.38
VIVOTEK Application Development Platform Setting
Group:
vadp
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
version
<string>
6/7
Indicate the VADP version.
resource_total_memory 0,<positive
integer>
6/7
Indicate total available memory size
for VADP modules.
resource_total_storage 0,<positive
integer>
6/7
Indicate total size of the internal
storage space for storing VADP
modules.
resource_free_memory 0,<positive
integer>
6/7
Indicate free memory size for VADP
modules.
©
2022 VIVOTEK INC. All Right Reserved
239
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
resource_free_storage
0,<positive
integer>
6/7
Indicate current free storage size for
uploading VADP modules.
module_number
0,<positive
integer>
6/7
Record the total module number that
already stored in the system.
module_order
string[40]
6/6
The execution order of the enabled
modules.
module_save2sd
<boolean>
6/6
Indicate if the module should be
saved to SD card when user want to
upload it.
If the value is false, save module to
the internal storage space and it will
occupy storage size.
* This feature is not supported when
"capability_securecam_support=1"
and the version number of
"capability_securecam_version" <
"1.0.1.0"
number
string[128]
6/7
This number is used to register
license key for VADP application.
status
string[40]
6/7
Indicate the hardware restore status
developer_mode
<Boolean>
6/6
Developer mode provide ways to
establish communication between
the developer of VADP vendor and
your camera.
* Only available when
capability_securecam_support=1.
7.38.1.
VADP Settings for Each Hyperlink
Group:
vadp_hyperlink_i<0~(n-1)>
Maximum of n=10 hyperlink is supported.
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
moduleidx
0,<positive
integer>
1/7
Refer to the package index.
title
string[40]
1/7
Name of the vadp hyperlink.