Emulex NQTR0V-NATM - Manual (Page 176)

8-14 Chapter 8
Change NetBios Printer’s Properties
If you have chosen a NetBios Protocol printer to be changed, the following
screen will be displayed:
Figure 8-8: Change NetBios Printer’s Properties Window
1) Change the S ERVICE N AME or S ERVER N AME as needed.
2) Click on M ORE >>> to view the A DVANCED O PTIONS screen.
Make changes as necessary.
3) Click on OK to save changes.
Delete Printer
1) Select the existing printer to delete.
2) Pull down the L AUNCH menu.
3) Select S TOP P RINTER .
4) Pull down the I NSTALL menu.
5) Select R EMOVE P RINTER .