Emulex NQTR0V-NATM - Manual (Page 87)

Novell NetWare 3-5
Restart the Printer Server
The following procedure allows the printer server to read the new
configuration in the file server’s bindery. Recycling power on the Emulex
printer server will also accomplish the same rediscovery.
From the P RINTER S ERVER I NFORMATION menu:
1) Select P RINTER S ERVER S TATUS /C ONTROL .
NOTE: This option appears only if the printer server is
powered up and connected to the network and the
configuration was successful.
2) Select S ERVER I NFO .
3) Select C URRENT S ERVER S TATUS .
4) Select R UNNING .
5) Press E NTER .
6) Select D OWN or G OING D OWN A FTER C URRENT J OBS .
7) Press E SC until the message Exit PCONSOLE appears.
8) Select Y ES to exit PCONSOLE.
Configure as PSERVER - NetWare 4.xx
With the release of NetWare 4.xx, NetWare Discovery Services (NDS) has
replaced the bindery as a repository of resource information. Configuration
for PSERVER varies for bindery emulation and NDS. Please refer to the
appropriate section to configure Pserver.
When Novell NetWare is configured to use the Emulex printer server:
• Up to 128 file servers (default is 16) may service the printer server, with
a maximum of 256 queues.
NOTE: NDS objects can also be defined and administrated
using NetWare Administrator
™
in Windows and
NetAdmin
™
in DOS environments.