Emulex NQTR0V-NATM - Manual (Page 84)

3-2 Chapter 3
Before Installation
We recommend writing down the following parameters from the Setup
Section in Chapter 2. Refer to them during the installation procedure.
Default Server Name: ____ ____ ____ ____ ____ ____ ____ ____ ____
Default Printer Name: ___ ___ ___ ___ ___ ___ ___ ___ ___ _ ___
Choose PSERVER or RPRINTER
The printer server is capable of operating as a PSERVER, RPRINTER or
simultaneously as both. Choose the best configuration to meet your needs.
Using the Emulex printer server as a Novell Print Server (PSERVER):
• replaces the need for a dedicated Novell PSERVER
• provides faster throughput than using the printer server as an RPRINTER
operating through a Novell PSERVER
• occupies one user slot per attached file server
• supports encrypted or unencrypted passwords
Using the Emulex printer server as a Novell Remote Printer (RPRINTER):
• requires a Novell PSERVER module somewhere on the network
• provides slower throughput than using the printer server as a PSERVER
• occupies one user slot
• uses the PSERVER module to handle passwords