Emulex NQTR0V-NATM - Manual (Page 153)

7-10 Chapter 7
NOTE: To add additional drivers to the Emulex print
manager driver list, install a new printer under the
OS/2 Print Manager and select the desired driver
for the new printer.
5) Enter Server Name.
This is the Emulex Default Server Name. Refer to the Before Installation
section of this chapter.
6) Enter Service Name.
This is the Emulex Default Printer Name. Refer to the Before
Installation section of this chapter.
7) Click M ORE >>>.
This returns the user to view the A DVANCED O PTIONS window.
Advanced Options
Modify or select other.
Trace Mode Enabling this option is not recommended.
However, if enabled, debugging information is
sent to RPRINTNB.EXE stdout.
Use Log File This option may be used to create a log file of
the RPRINTNB activities for each print job.
Log File Name Enter a name for the log file.
Verbose Log Enabling this option is not recommended.
However, if enabled, it expands the amount of
debugging information in both the log file and
RPRINTNB’s stdout.
Timeout On Server
Response The number of seconds the print processor
waits for a server before sending a new
request.
Times To Send Job
Request The number of requests the print processor
sends before considering the printer
unavailable.
Retries For Server
Response The number of retries when waiting for an
Emulex printer server response.
From the NetBios A DVANCED O PTIONS window: