Senal AWS-24G 2-Person Wireless Microphone System for Cameras and Smartphones (2.4 GHz) - Manual (Page 16)

Operating Modes
Mono: Sums the signal of receiver channels A and B, and outputs the combined signal to
your recording device.
Stereo: Separates the signals on channels A and B, outputs discretely to separate channels
on your recording device.
Safety: Outputs two mono tracks. One is at the selected gain setting. The other is reduced
by 6 dB. Recording in safety mode is useful for audio with wide volume changes. If you hear
clipping in the original audio, the reduced output of the safety recording will give you clean
audio.
Adjusting the Input Signal Gain
The Output Gain Control buttons adjust the receiver’s output level from -12 to +12 dB.
Mono Mode: The Up/Down buttons change the gain on both channels.
Stereo Mode: Each button controls the gain level for its channel. Press the channel’s button
repeatedly to cycle through the gain level from -12 to +12 dB.
Safety Mode: As you adjust the gain on channel A, the B channel automatically sets its gain
to 6 dB less than channel A.
Operating the Receiver (RX)
14
▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪