Elo TouchSystems 1525L - Manual (Page 164)

161
APPENDIX B. COMMAND LIST SUMMARY
This is a consolidated list of all available commands for the MagTek Windows Drivers.
Command Description Page
/cancel
cmd Cancel a command. cmd can be any of the transaction
commands. 16
/display
[x] Display a message or two alternating messages on the LCD
screen. 17
/echo
string Driver test command. 17
/event
n data Response to an unsolicited event notification. 18
/get
prop Get a property. 18
/load_key
n key Load a key into the device. 19
/rawrecv Receive data from the device 20
/rawsend
x Send arbitrary data to the device. 21
/rawxact
x Execute a send/receive transaction with the device in raw
mode. 21
/read
[[x] y] Read data from the device. 22
/reset Clear any pending operations and reset the device to initial
state. 26
/set
prop val Set a property. 26
/ver Read driver version. 26
/write
data Encode magnetic stripe command. 27