Edimax Technology Edimax user guide Router - Manual (Page 39)

Page 35
Settings – Dynamic DNS
Dynamic DNS
Service Use this to Enable/Disable the Dynamic DNS feature, and select the required
service provider.
• Disable – Dynamic DNS is not used.
• TZO – Select this to use the TZO service (www.tzo.com). You must configure
the TZO section of this screen.
• Standard Client – Select this to use the standard service (from
www.dyndns.org or other provider). You must configure the Standard Client
section of this screen.
• 3322(in China) – This is available in China. It is similar to “Standard client”
• User Defined DDNS Server – This is the user define DDNS server. If the
DDNS other than TZO, dyndns.org and 3322.
WAN Port
Binding
• Select the WAN port on which the Dynamic DNS is used.
• The "Force Update" button will update your record on the Dynamic DNS
Server immediately.
Additional
Standard
Client or 3322
Settings These options are available if using the standard client.
• Enable Wildcard – If selected, traffic sent to sub-domains (of your Domain
name) will also be forwarded to you.
• Enable backup MX – If enabled, you must enter the Mail Exchanger address
below.
• Mail Exchanger – If the setting above is enabled, enter the address of the
backup Mail Exchanger.