Edimax Technology Edimax user guide Router - Manual (Page 57)

Page 53
Settings – SNMP
System
Information
• Contact Person – The name of the person responsible for this device.
• Device name – The name of The Load Balancer.
• Physical Location – The location of The Load Balancer.
Trap Targets Enter the IP address of any targets (PCs running SNMP software) to which you
want traps to be sent. All traps are level 1.
Email Alert
This feature will send an warning Email, inform system administrator that one of the WAN ports was
disconnected.
Email Alert – You can choose to enable or disable it to send a warning email.
Email Sender Address – It is an email address which will send the warning email.
Email (SMTP) Server Address – It is an email server address the warning email will be sent to.
Email Recipient Address – It is an email address of system administrator the email will be sent to.
Figure 7-2: Email Alert