Edimax Technology Edimax user guide Router User Manual
Page 51
Advertising
Page 47
Block Well-known
ports
Select the services you wish to block. The current group will not be able
to use any services which are checked.
User-defined Ports to
Block
This section is optional. It allows you to define your own filters if
required. For each filter, the following information is required.
• Name – Enter a meaningful name for this filter.
• TPC/UDP Packets – Select either TCP or UDP, depending on
which protocol is used by the service you wish to block.
• Port No. Range – Enter the range of port numbers used by the
service you wish to block. If only a single port is required, enter it in
both fields.
Advertising