Edimax Technology IC-1000 - Manual (Page 10)

10. Internet Camera is working through the network (TCP/IP Protocol). The IP address setting
must be correct, or you cannot access to the camera. The wizard program will detect the
IP address status of your network automatically and suggest a free IP address for the
Camera. You can accept the suggested value or enter the value manually. If you enter the
value manually, please be aware that the “Subnet Mask” must be the same for both the
camera and the PC. Click “Finish” to apply the configuration.
10
11. This wizard will pop up a window to ask you if you want to run the “Camera Viewer” and
see the video of the Camera immediately. Select “OK” to run “Camera Viewer”.