Edimax Technology IC-1000 - Manual (Page 24)

7. Using the Camera Viewer
The Camera Viewer Utility allows users to view video from up to four cameras. It also allows
users to manual/schedule record video and playback the recording file. The status of camera
viewing such as frame rate, video received, and etc. are also recorded in time.
There are three ways to run the Camera Viewer Utility as follows.
1. Click “Start”, select “Programs\IP Camera\Camera Viewer” to run the utility.
2. Click the “IP Camera Viewer” icon to run the utility.
3. Click “Setting Wizard” from Administrator Utility and follow the instructions in the utility.
7.1. Panel Introduction
In the beginning when you start the Camera Viewer, you would see a Control Panel and a four
division Viewer window.
24