Edimax Technology IC-1000 - Manual (Page 5)

LAN Port
Power Jack
4.3. Installation Procedure
1. Unpack the Internet Camera package and verify that all the items listed in the Chapter 2
are provided.
2. Connect the Internet Camera to your network by attached the network cable from the
switch/router to the UTP port of the Internet Camera.
3. Connect the power adapter to the Internet Camera and plug the power adapter to power
outlet. The Internet Camera will be powered on. When the Internet Camera is ready, the
Ready LED will show orange color.
Note: It is highly recommended to use the power adapter shipped with the Internet Camera,
do NOT use any other power adapter from any sources.
5. Software Installation
Follow the simple steps below to run the Install Wizard to guide you quickly through the
Installation process. The following installation is implemented in Windows XP. The installation
procedures in Windows 98SE/Me/2000/Server 2003 are similar.
1. Insert the CD shipped along with the Internet Camera into your CD-ROM drive. The
“Autorun.exe” program should be executed automatically. If not, run “Autorun.exe”
manually from “Autorun” folder in the CD.
5