Edimax Technology IC-1000 - Manual (Page 44)

44
Camera Information
Camera Name The default camera name is “IPCamera_MJPEG”. It is
recommended to name a meaningful name for the camera.
Firmware Display the current firmware version of the camera.
Apply When you finish the “Camera Information”, click “Apply”.
DDNS Service
Enable/Disable Enable or disable DDNS function of the camera.
Provider Several companies provide DDNS service. This camera supports
the service from DynDNS company.
Domain Name The domain name given by DynDNS is
“registername.dyndns.com”. Enter the domain name that you
register for the camera from DynDNS web site.
Account Enter the login name for the DDNS service.
Password Enter the password for the DDNS service.
Apply When you finish the “DDNS Service” setting, click “Apply”.
UPnP
Enable/Disable Enable or disable UPnP function of the camera.
Apply When you finish the “UPnP” setting, click “Apply”.
Maintenance
Reset to Defaults To reset the camera to factory default, click “Apply”. Then, follow
the instruction of the screen to complete the process. The factory
defaults are as follows.
Camera Name: “IPCamera_MJPEG”
IP Address: “192.168.2.3”
Subnet Mask: 255.255.255.0
Administrator Name: “Admin”, Password: “1234”