Edimax Technology IC-1000 User Manual
Page 43
43
E-Mail Setting
E-Mail Address
Set up the E-Mail account as the receiver for the snapshot
picture.
SMTP Server
Specify the SMTP mail server for sending E-Mail.
Apply
When you finish the “E-Mail Setting”, click “Apply”.
IP Information
IP Address
Enter an unused IP Address within the IP address range used on
your LAN. If the IP Address of your LAN is from the 192.168.2.0
to 192.168.2.250, you can set an unused IP Address from the
range for the camera, for example: 192.168.2.250.
Subnet Mask
The Subnet Mask field must match the subnet setting on your
LAN. For example: 255.255.255.0.
Gateway
The Gateway is used to forward frames to destinations in a
different subnet on the Internet. The Gateway setting must be the
same with the gateway used by the PCs on your LAN.
DNS Server
DNS Server (Domain Name Server) that translates names to IP
addresses. Set the same DNS Server as the PCs on your LAN.
Video Port
The Video Port is used to transmit or receive the video streaming
in the network. The default port setting is “4321”. If you want to
view the video from the camera, the port setting should be
correct.
Web Port
This camera support web connection, the default web port is 80.
Since the web server may use port 80, you can use a different
port for the camera. If you change the web port from 80 to 8080,
to connect the camera
through the web browser.
Apply
When you finish the “IP Information”, click “Apply”.