Epson 8000i - Manual (Page 31)

Connecting to a Computer 21
Connecting to a Computer
You can connect the projector to any computer capable of producing
standard VGA, Super VGA (SVGA), XGA, Super XGA (SXGA), or
UXGA output, such as:
❐ IBM compatible desktop PCs
❐ IBM compatible laptop PCs
❐ Apple Macintosh desktop computers, including Macintosh
Quadra,
® Macintosh Centris, ® Power Macintosh, and Power
Macintosh G3
❐ Any Apple PowerBook with video-out capability
❐ Most high-end workstations from Sun, Silicon Graphics, ® IBM,
and Hewlett-Packard. ® (You may need an adapter cable to connect
to some high-end workstations; see page 52.)
See the section that applies to your computer. Make sure both the
computer and projector are turned off before you start.
When you have finished connecting all your components, go to
page 57 to turn on the projector and equipment.
The following illustration identifies all the interface ports on the back
of the projector; you may want to refer to this as you connect your
computer or other equipment to the projector.
80009000.book Page 21 Monday, November 1, 1999 9:35 AM