Epson 8000i - Manual (Page 37)

Connecting to a Computer 27
4. To use the ELP Link IV software or to program new effects for the
Effects buttons on the remote control, connect one end of the
serial cable to the SERIAL terminal on the square end of the main
cable.
Connect the other end of the serial cable to the serial port on the
back of your computer.
Note: You will not be able to use ELP Link IV if your system has only
one serial port that is being used to support a serial mouse.
5. Tighten the screws on all connectors.
80009000.book Page 27 Monday, November 1, 1999 9:35 AM