Epson 8000i User Manual
Page 40
Advertising
1 • Setting Up the Projector
30
2. Connect the other end of the video cable to the laptop’s video
(monitor) port.
3. Tighten the screws on all connectors.
Connecting the Mouse and Serial Cables
If you want to use the remote control as a mouse or use the ELP
Link IV software, you need to connect the main cable. It provides
connectors for:
❐
The PS/2 or USB cable (to use the remote control as a mouse)
❐
The serial cable (to use the ELP Link IV software)
Refer to this illustration while following the steps below.
PS/2 or USB
9-pin serial
main cable
cable
Mouse/Com 1
port
cable
80009000.book Page 30 Monday, November 1, 1999 9:35 AM
Advertising