Epson 8000i - Manual (Page 34)

1 • Setting Up the Projector 24
1. If you will be viewing the video on your computer monitor as well
as the projector screen, disconnect the monitor cable from the
video port on the back of your computer. Then connect the
monitor cable to the projector’s Monitor Out port, as shown
below. (This is useful when you need to view the video output but
the projection screen is behind you.)
2. Connect one end of the projector video cable to the projector’s
Computer 1 port. (Use the Computer 2 port if you are
connecting a second computer.)
3. Connect the other end of the projector video cable to the
computer’s video port.
80009000.book Page 24 Monday, November 1, 1999 9:35 AM