Encore electronic ENDSL-A2+WIG2 - Manual (Page 13)

3. Connecting ENDLS-A2+WIG2 via Ethernet
Your router can be managed from anywhere with the embedded Web configuration using a
Web browser, such as Microsoft Internet Explorer or Netscape Navigator. Internet Explorer 6.0
and later or Netscape Navigator 7.0 and later versions with JavaScript enabled should be used.
3.1 Setup ENDLS-A2+WIG2 via Ethernet Cable
If there is an available LAN card present on your PC, you just simply connect ADSL router
and PC through the Ethernet cable. Once you establish Internet connection, you could browse
the Web through the Ethernet cable.
3.2 Configure TCP/IP
For Windows 98SE and ME
Step 1: Click Start then Settings and choose Control Panel
Step 2: Double click Network icon.
Step 3: Select Configuration tab, then choose TCP/IP from the list of installed network
Components and click Properties button.
Step 4: You can setup the following configurations in two methods:
12
Option1: Get an IP from Router Automatically