Encore electronic ENDSL-A2+WIG2 User Manual
Page 42
LABEL DESCRIPTION
Username
Enter your username for your PPPoE/PPPoA connection.
Password
Enter your password for your PPPoE/PPPoA connection.
Encapsulation
Select your encapsulation type from the dropdown list.
Bridge Interface
Select whether the Interface will be Activated or Deactivated.
Connection
Select whether your connection is always on or if it connects on demand. If on
demand, specify how many minutes the connection may be idle before it
disconnects.
TCP MSS Option
Enter the TCP MSS you wish to use here.
Get IP Address
Choose whether the ROUTER obtains the IP address statically or dynamically.
Static IP Address
Enter the static IP address here. Only if you chose Static above.
IP Subnet Mask
Enter the IP subnet mask here. Only if you chose Static above.
Gateway
Enter the gateway here. Only if you chose Static above.
NAT
Select whether NAT is Enabled or Disabled.
Default Route
Select whether this PVC will be the default route for Internet data.
TCP MTU Option
Enter TCP MTU Value here.
Dynamic Route
Select the RIP type and direction from the dropdown lists.
Multicast
Select the multicast protocol you wish to use from the dropdown list.
41