Encore electronic ENDSL-A2+WIG2 - Manual (Page 34)

5.3.3 Configuring PPPoE
PPPoE provides access control and billing functionality in a manner similar to dial-up
services using PPP. The router bridges a PPP session over Ethernet (PPP over Ethernet, RFC
2516) from your computer to an ATM Permanent Virtual Circuit (PVC) that connects to the ADSL
Access Concentrator, where the PPP session terminates. Single PVC can support any number
of PPP sessions from your LAN.
The following table describes the labels in this screen.
LABEL DESCRIPTION
Username Enter your username here.
Password Enter your password here.
VPI Enter the VPI here. VPI can range from 0 to 255.
VCI Enter the VCI here. VCI can range from 1 to 65535.
Connection Type Select your connection type from the dropdown list.
Your ISP should provide the above information. Note that you must enter the user
name exactly as your ISP assigned it. If the assigned name is in the form of user@domain where
domain identifies a service name, enter it exactly as given. Click on BACK to return to the
previous screen, on NEXT to continue, or on EXIT to exit the wizard without saving.
5.3.4 Configuring PPPoA
33
Point-to-Point Protocol over ATM Adaptation Layer 5 (AAL5) (PPPoA) provides access
control and billing functionality in a manner similar to dial-up services using PPP. The router
encapsulates the PPP session based on RFC1483 and sends it through ATM PVC to the ISP’s
DSLAM.