Encore electronic ENDSL-A2+WIG2 - Manual (Page 8)

z ANSI T1.413 issue 2
z ITU-T G.992.1 (G.dmt)
z ITU-T G.992.2 (G.lite)
z G.994.1 (G.hs, Multimode)
z ITU-T G.992.3 (ADSL2 G.dmt.bis)
z ITU-T G.992.4 (ADSL2 G.lite.bis)
z ITU-T G.992.5 (ADSL2+; Annex A, B, I, J, L & M)
z Reach Extended ADSL (RE ADSL)
‹ Quick Setup Wizard
Support Quick Setup Wizard Web GUI to configure the ENDLS-A2+WIG2 easily and
quickly.
‹ Multi-connection protocol support
z Multi Protocol over AAL5 (RFC1483 / 2684)
z Classical IP over ATM (RFC 1577)
z VC and LLC Multiplexing
z PPP over Ethernet (RFC 2516)
z PPP over ATM (RFC 2364)
z Supports OAM F4/F5 loop-back, AIS and RDI OAM cells.
z ATM Forum UNI 3.1/4.0 PVC
z Support up to 8PVCs.
z Traffic Shaping (ATM QoS) UBR, CBR, VBR-rt, VBR-nrt
‹ Network Address Translation (NAT)
Network Address Translation (NAT) allows the translation of an Internet protocol address
used within one network (for example a private IP address used in a local network) to a different
IP address known within another network (for example a public IP address used on the Internet).
‹ Universal Plug and Play (UPnP)
Universal Plug and Play is a standard that uses Internet and Web protocols to enable
devices such as PCs, peripherals, intelligent appliances, and wireless devices to be plugged into
a network and automatically know about each other. This protocol is used to enable simple and
robust connectivity among stand-alone devices and PCs.
7
‹ Dynamic DNS Support
With Dynamic DNS support, you can have a static hostname alias for a dynamic IP