Epson 10000XL - Manual (Page 17)

Scanning Basics
17
On the Normal preview screen, you can check the results of your adjustments more
closely by clicking the
Zoom button. Or (on both preview screens) you can use
the Densitometer to inspect the image on a pixel-by-pixel basis. Click the
Densitometer button, then hold your mouse pointer over the image to view
color components on the Densitometer screen. For details, click the Help button.
Working With Multiple Marquees
In the Normal preview screen (shown below), you can draw up to 50 marquees. This
lets you select more than one part of the image for scanning (the area within each
marquee is scanned as a separate image, even if you have overlapping marquees). You
can make independent image quality adjustments for each selected area.
■ To apply the same image quality adjustments to all selected areas at once, click the
All button, then make any desired adjustments.
■ Use the Copy and Erase buttons to add or remove marquees as needed.
■ When you’re ready to scan, click the All button to select all the marquees for
scanning; otherwise, only the currently selected marquee is scanned.
Note: For instructions on placing multiple photos on the scanner and previewing them,
see page 38.
Number of
marquees
Auto-detect
Erase
marquee
Copy
Currently selected marquee
Zoom
Select all
Inactive marquee
10000XL.book Page 17 Friday, June 4, 2004 1:57 PM