Epson 10000XL - Manual (Page 47)

Using Optional Equipment
47
6. Place the transparency guide at the
back edge of the document glass, so
that its alignment pins fit into the
holes as shown.
Placing Standard Film Sizes on the Scanner
Use the film holders that came with the transparency unit to scan 35 mm slides,
filmstrips, and negatives, 4 × 5 inch film, and medium format (120/220) film.
1. Place the film holder on a flat surface. Open its cover (if it has one), then load the
film with its shiny side face down and the film emulsion layer face up.
L400 16
35 mm slides 35 mm strips
Medium format film 4 × 5 inch film
10000XL.book Page 47 Friday, June 4, 2004 1:57 PM