Epson 10000XL - Manual (Page 51)

Using Optional Equipment
51
10. Use these Adjustment settings (on the main screen) to modify your images as
necessary.
Auto Adjust – If you’ve turned off Continuous auto exposure , click this
button to apply your color management settings and have the software
determine the best exposure and color balance for your scan. (If
Continuous
auto exposure is turned on, clicking this button has no effect; see page 31.)
Histogram Adjustment – Click this button to adjust the highlight, shadow,
and gamma input levels.
Tone Correction – Click this button to choose a preset tone curve for specific
effects or to change the tone curve manually.
Image Adjustment – Click this button to adjust the color balance, saturation,
brightness, and contrast settings.
For any of these settings, you can click Reset to go back to the default settings for
an image. Click the Help for more information about using these options.
11. To enhance the appearance of your images, select from the following options:
■ To sharpen an image, select
Unsharp Mask Filter .
■ To reduce the appearance of graininess
in your film, select
Grain Reduction .
■ To correct the color on faded photos,
select
Color Restoration .
■ To digitally remove unwanted specks of dust, select Dust Removal .
Click (Windows) or (Macintosh) next to each setting and then choose a Level
to increase or decrease the effect. For more information about these options, see
page 33.
12. Click Scan .
13. When scanning completes, click Close to exit EPSON Scan and view the scanned
images in your imaging application.
10000XL.book Page 51 Friday, June 4, 2004 1:57 PM