Epson 1600 - Manual (Page 112)

5-14 Using the Start Button
R4C0910
Rev. C
A5 size SBUTTON.FM
1/12/00 Pass 3
L Proof Sign-off:
SEI Y.Takasaki M.Fujimori
M.Fujimori
SEI M.Kauppi
If you want to use your scanner’s a Start button with
PageManager for EPSON as the supporting application, follow
the steps on the next page.
1. Select your scanner from the installed scanners and cameras
list in the Scanners and Cameras Properties dialog box.
Click Properties, and then click the Events tab.
2. You can see the Start Button is listed as the scanner event.
Make sure the check box of the application you want to assign
to the
a Start button is selected and all other application check
boxes are clear in the Send to this application list.
Note:
❏ If more than one application is selected, a dialog box appears
prompting you to select an application when the Start button
is pressed.
❏ Some applications do not support linkage to scanners and
digital cameras. Linkage is available only with the applications
that appear in the Send to this application list.