Epson 1600 - Manual (Page 154)

7-8 Maintenance and Troubleshooting
R4C0910
Rev. C
A5 size TRBLE.FM
1/12/00 Pass 3
L Proof Sign-off:
SEI Y.Takasaki M.Fujimori
M.Fujimori
SEI M.Kauppi
The READY light does not come on.
Cause What to do
The scanner is off. Press the Poperate button to turn on
the scanner.
The scanner is not connected
correctly. Make sure the power cord is
connected to the scanner and plugged
into a power outlet.
The scanner does not scan.
Cause What to do
The scanner is not ready to
scan. Wait until the READY light stops
flashing and remains on (ready for
scanning).
Interface port or software
settings are incorrect. Make sure your interface port and
software settings are correct. Also
make sure that your computer’s
interface board is installed properly.
For SCSI interface users :
SCSI ID or terminator is
incorrect .
Make sure the scanner’s SCSI ID and
terminator are set correctly. See
“Connecting the Scanner to Your
Computer using the SCSI Interface”
on page 2-8.
Interrupt settings are
conflicting with your SCSI
board. If you have other expansion boards in
your computer, make sure that their
interrupt settings are not interfering
with your SCSI board. See your
computer’s documentation for
details.