Epson 1600 - Manual (Page 177)

7
Maintenance and Troubleshooting 7-31
R4C0910
Rev. C
A5 size TRBLE.FM
1/12/00 Pass 3
R Proof Sign-off:
SEI Y.Takasaki M.Fujimori
M.Fujimori
SEI M.Kauppi
2. Click Close to close the System Properties window.
3. Make sure your scanner is on and restart your computer.
4. When the following dialog appears, insert the scanner
software CD in the CD-ROM drive, then click OK.
If the following dialog appears, click d, then browse and
select or type in the CD-ROM drive letter, EPSON folder, the
folder of your preferred language, and Win98 folder as the
location, as shown below, then click OK.
5. The Screen Calibration window appears. Follow the
instructions described in Chapter 3.