Using the ieee 1394 scanner i/f card, System requirements, Using the ieee 1394 scanner i/f card -26 – Epson 1600 User Manual

Page 140

Advertising
background image

6-26

Options

R4C0910
Rev. C

A5 size

OPTIONS.FM

1/12/00

Pass 3

L

Proof Sign-off:
SEI Y.Takasaki M.Fujimori
M.Fujimori
SEI M.Kauppi

When you are scanning high-quality color or halftone documents,
it is recommended you open the Automatic Document Feeder and
scan documents individually.

Using the IEEE 1394 Scanner I/F Card

The optinal IEEE 1394 Scanner I/F Card (B80834✼) offers high-
speed data transfer and flexible connectivity for your scanner. It
supports a peak data transfer rate of 400 Mbps, and interface
cables can be connected and disconnected without turning off the
scanner or your computer. You can connect multiple IEEE 1394
devices simultaneously in either a daisy-chain or tree
configuration.

System requirements

Unless your computer already has built-in IEEE 1394 ports or an
IEEE 1394 board installed, you need to install an IEEE 1394 board.

If you already have an IEEE 1394 board installed in your
computer, go to “Installing the IEEE 1394 Scanner I/F Card in
your scanner” on page 6-27.

Hardware: Power Macintosh G3 equipped with built-in IEEE

1394 (FireWire) port, or Power Macintosh G3
equipped with an IEEE 1394 (FireWire) PCI card,
supported by Apple

®

Computer.

OS:

Mac OS 8.6 or later, with FireWire Update 2.1 or
later.

Advertising
This manual is related to the following products: