Epson 1600 - Manual (Page 173)

7
Maintenance and Troubleshooting 7-27
R4C0910
Rev. C
A5 size TRBLE.FM
1/12/00 Pass 3
R Proof Sign-off:
SEI Y.Takasaki M.Fujimori
M.Fujimori
SEI M.Kauppi
4. Double-click the Scanners and Cameras icon.
5. Select EPSON Expression 1600 and click Remove.
Note:
❏ Be sure you have selected the correct device to remove. Since there
is no Cancel button, there is no way to stop removal of a device
once you click the Remove button.
❏ If other devices listed in the Scanners and Cameras Properties dialog
box are not connected to the computer when you remove the scanner,
you may not be able to properly remove them at a later time. Be sure
to connect and turn on all the devices listed in the Scanners and
Cameras Properties dialog box before turning on your computer and
removing the scanner.
6. Click OK to close the dialog box, then close the Control Panel.
7. Shut down Windows98 and turn off your computer, but leave
the scanner on.
8. Connect the USB cable to the new USB port.
9. Turn on your computer.
10. When the dialog box below appears, insert your scanner
software CD into your CD-ROM drive, then click OK.
EPSON TWAIN Pro will be reinstalled.